Buell 2003XB9S Service Manual page 482

HOME
DRIVE BELT REMOVAL
1. Place a scissor jack under jacking point and raise rear
wheel off ground. For location of jacking point see
2-99.
2. Remove right side rider footpeg support bracket. See
2.30 FOOTPEG, HEEL GUARD AND
3. Remove right passenger footpeg support bracket.
b1064x2x
10
9
1. Inner belt guard
2. Spacer collar
3. Lower belt guard
4. Front belt guard
5. Sprocket cover
Figure
MOUNT.
8
8
7
Figure 1-40. Belt Guard Assembly
4. Remove chin fairing fasteners. See
5. See Figure 1-40. Remove front sprocket cover (5) by
removing fasteners. See
Front belt guard (4) will dangle but can not be removed at this
time.
1
3
6
5
6. Sprocket cover fasteners
7. Lower belt guard fasteners
8. Upper belt guard fasteners, short
9. Upper belt guard fasteners, long
10. Upper belt guard
2003 Buell XB9S: Drive/Transmission
2.34 CHIN FAIRING.
2.31 SPROCKET COVER.
NOTE
2
4
6-23