Volume Creation - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
NOTE: GuardianOS snapshots should not be used on volumes that contain iSCSI disks. If a

Volume Creation

When you click the Create Volume button, the Create Volume page is displayed. Make your
selections and click the Create Volume button.
For more information, refer to
At the confirmation page, click Create Volume a third time to create the volume. At the
successful creation page, click Create Share to provide access to this new volume.
10400317-001 10/2011
volume will contain one or more iSCSI disks, decrease the Snapshot pool size to zero. For
information about creating snapshots of iSCSI disks, see
Disks" on page 6-22.
"Volume Properties" on page
©2010-11 Overland Storage, Inc.
5 – Traditional RAID Storage
"Configuring VSS/VDS for iSCSI
5-14.
5-13