Volume Properties - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
This opens the Security > Shares option page. Enter the options you want and click the
Create Share button again. The share is automatically created and shown in the Share table.
See "Shares" on page 7-6

Volume Properties

By clicking a volume's name on the main page, details of that particular volume are shown
on a Volume Properties page. From this secondary page, you can:
• Change the volume name.
• Increase the volume size.
• Enable the write cache (only recommended if a UPS system is attached).
• Delete the entire volume.
10400317-001 10/2011
for complete details.
©2010-11 Overland Storage, Inc.
5 – Traditional RAID Storage
5-14