Overland Storage SnapServer Administrator's Manual page 29

SnapServer 7.0 Administrator's Guide
When this is done, click Next.
You will be prompted to restart if you have chosen either of the following options:
• Traditional RAID.
• If you have changed the server name (regardless of whether you have chosen
DynamicRAID or Traditional RAID).
Click Restart to continue. The server will restart and your browser will automatically
reconnect to the server.
Log in again when prompted to do so.
Click Next to select the RAID type you want and proceed; or, if you want to manually
configure storage, check Check here if you would rather manually create your own storage and
confirm at the next prompt.
10400317-001 10/2011
©2010-11 Overland Storage, Inc.
2 – Server Setup and Options
2-10