Date/Time - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Date/Time

Use this page to configure date and time settings in ISO 8601 formatting. The time stamp
applies when recording server activity in the Event Log (Monitor tab), when creating or
modifying files, and when scheduling snapshot or antivirus operations.
CAUTION:
not automatically propagate to any scheduled events you have already set up for snapshot,
antivirus, or Snap EDR operations. These operations will continue to run based on the previous
date and time setting. To synchronize these operations with the new date and time settings, you
must reschedule each operation.
To Configure Basic Date and Time Settings
Edit date and time settings as described in the following table, and then click OK.
NOTE: GuardianOS automatically adjusts for Daylight Saving Time, depending on your time
10400317-001 10/2011
If the current date and time are reset to an earlier date and time, the change does
Option Description
Date Enter the current date in the format indicated.
Time Enter the current time in the format indicated.
Time Zone Select the time zone that you want to use for this server.
zone.
©2010-11 Overland Storage, Inc.
2 – Server Setup and Options
2-16