Overland Storage SnapServer Administrator's Manual page 55

SnapServer 7.0 Administrator's Guide
2. Edit the fields shown in the following table:
Option
Member Of
Workgroup/Domain
Name
Organizational Unit
Disable NetBIOS
over TCP/IP
Administrator
Admin Password
Enable Trusted
Domains
Administrator
Admin Password
3. Click OK to update Windows network settings immediately.
10400317-001 10/2011
Description
Select Active Directory Domain.
Enter the name of the domain.
NOTE: Windows 2000 domain controllers must run SP2 or later.
To create a machine account at a different location than the default,
enter a name in the Organizational Unit field. By default, this field is
blank, signaling the domain controller to use a default defined within
the controller.
NOTE: Sub-organizational units can be specified using Full
Distinguished Name LDAP syntax or a simple path
([organizationalunit]/[sub-unit1]/[sub-unit1a])
Some administrators may wish to disable NetBIOS over TCP/IP.
Select the checkbox to disable NetBIOS; clear the checkbox to leave
NetBIOS enabled.
NOTE: If you disable NetBIOS, you must enter the domain name as
a fully qualified domain name (for example,
actdirdomname.companyname.com). A short form such as
ActDirDomName will not work.
Enter a user name and password with sufficient administrative
privileges to allow a remote computer to join the domain.
SnapServers recognize trust relationships established between the
domain to which the SnapServer is joined and other domains in a
Windows environment by default. Select the checkbox to toggle this
feature.
NOTE: SnapServers remember trusted domains. That is, if this
feature is disabled and then activated at a later time, the
previously downloaded user and group lists, as well as any
security permissions assigned to them, will be retained.
Enter a user name and password with sufficient administrative
privileges to allow a remote computer to join the domain.
©2010-11 Overland Storage, Inc.
3 – Network Access
3-12