Volume Deletion - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Volume Deletion

To delete a volume, click the Delete button on the Storage > Volumes page.
To Delete a Volume
1. Navigate to Storage > Volumes .
2. Click the volume name in the table.
3. At the Volume Properties page, click Delete Volume.
4. At the confirmation page, click Delete Volume again.
You are returned to the Volumes page once the volume is deleted.
NOTE: This may take time, as deleting a DynamicRAID volume deletes all accumulated data
10400317-001 10/2011
CAUTION: Deleting a volume deletes all data on the volume.
within that volume. The amount of time it takes to delete the volume depends on the
amount of data.
©2010-11 Overland Storage, Inc.
4 – DynamicRAID Storage
4-11