Checking Filesystems - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
Click Add Host File Entry, complete the fields as described on the following table, and then
click Add Host File Entry again.
Option
IP Address
Host Name
Alias (optional)

Checking Filesystems

Filesystems on individual volumes can be checked for errors and repaired, if necessary. The
root volume filesystem can also be checked, and any errors found will automatically be
repaired. Because GuardianOS automatically checks the root volume for errors if any of a
number of triggers occurs (for example, a power outage or failure of the volume to mount),
it is recommended that the root filesystem check feature only be used when directed by a
Technical Support representative.
To Check the Filesystem on a Volume
Checking Filesystems ( Maintenance > Tools > Check Filesystem ) provides a thorough
filesystem check on the volume.
10400317-001 10/2011
Description
The IP address of the backup server.
Enter the fully qualified address for the backup server, using the
format: myserver.mydomain.com.
NOTE: Your backup software may require that you enter either one or
both of these fields. See the OEM documentation to
determine requirements.
Enter an optional abbreviated address for the backup server, using the
format: myserver.
NOTE: Your backup software may require that you enter either one or
both of these fields. See the OEM documentation to
determine requirements.
©2010-11 Overland Storage, Inc.
9 – Maintenance
9-18