Host File Editor - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Host File Editor

Use this page to identify backup or media servers in the SnapServer's hosts file. This page
allows you to supply a hostname-to-ip address mapping that persists across system reboots.
10400317-001 10/2011
Option Description
Recipients Enter one or more email addresses to receive the notifications.
One address is required. Three additional email addresses can
be added.
Send Email Check the boxes next to the events you wish to be notified about:
Notification
Server shutdown/restart – The server shuts down or reboots
•
due to an automatic or manual process.
• RAID Set event – (1) A RAID 1 or 5 experiences a disk drive
failure or a disk drive is removed; or (2) A RAID 1 or 5
configures a spare or a new disk drive as a member.
Volume is Full – Storage space or storage pool on a volume
•
reaches 95% utilization.
Hardware event – The internal temperature for the server
•
exceeds its maximum operating temperature or other hardware
problems.
• Printing event – A printer error occurs (for example, the printer
is out of paper).
Administrative operation event – A Data Import operation
•
has finished or experienced an error.
• License event – One of the trial licenses included on the
SnapServer is about to expire. A notification email will be sent
14 days before the license expires. One day before the license
expires another email will be sent. It is recommended that, if
you are not acquiring a license key for the SnapExtension that
is expiring, you turn off the SnapExtension.
Send a Test Alert To verify your settings, check
©2010-11 Overland Storage, Inc.
9 – Maintenance
Send a test email , then click OK.
9-17