Installing The Emc Networker Client - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
2. In SSH, install the files:
cd /shares/SHARE1/NBClients/catalog/anb
./client.inst
Follow the instructions, choosing RedHat Linux (choose 2.6 kernel version, if
available) as the type.
3. Once the NetBackup Client is installed, reboot the server using the Web Management
Interface ( Maintenance > Restart ) to start the client service.
4. Verify that you can configure the Unix client:
a. Create a policy and add the SnapServer as a client.
b. Look at the client list to verify that the SnapServer client is listed.
Uninstall the NetBackup v6.5 Client
1. Log in to the client system as the root user.
2. Navigate to the volume where you installed the NetBackup directory.
cd /hd/vol_mnt[X]/
rm -rf /usr/openv/
rmdir openv/
3. Remove the NetBackup entries in the client's
Locate the lines, marked by the following strings and delete them:
# NetBackup services#.....# End NetBackup services #
4. Remove the NetBackup services by deleting the files for
bpjava-msvc
rm -rf /etc/xinetd.d/bpcd
rm -rf /etc/xinetd.d/vnetd
rm -rf /etc/xinetd.d/vopied
rm -rf /etc/xinetd.d/bpjava-msc
5. Restart the SnapServer services by either rebooting or typing:
/etc/rc.d/init.d/xinetd reload

Installing the EMC NetWorker Client

NOTE: This procedure assumes that you are using the default SnapServer configuration; and
This section describes how to install the EMC NetWorker Unix/Linux client, as well as
special procedures EMC NetWorker users must follow in order to perform backup and
restore operations on the SnapServer.
Prepare the SnapServer
1. Connect to the server over SSH.
NOTE: SSH v2 is required. If you fail to connect to the server, ensure that your SSH client is
2. Log in as
10400317-001 10/2011
in the
/etc/xinetd.d
you have created a directory called agent (to which to copy your agent/client files) on the
default share (SHARE1), such that the path to the directory is /shares/SHARE1/agent.
configured to connect via SSH v2.
(using the password for the admin account).
admin
©2010-11 Overland Storage, Inc.
/etc/services
bpcd
/ directory.
B – Backup Solutions
file.
, , , and
vnetd vopied
B-10