Overland Storage SnapServer Administrator's Manual page 241

SnapServer 7.0 Administrator's Guide
Command
snapshot sched get
snapshot sched set
snapshot sched list
snapshot pool get
snapshot pool set
snapshot pool list
snapshot rollback
snmp get
snmp set
ssh get
ssh set
syslog all
syslog edr
syslog s2s
syslog syswrapper
system type
system type force
systemstatus
tape list
tape settings get
tape settings set
tcpip get
tcpip set
tcpip create bond
tcpip delete bond
updatenotification get
updatenotification set
updatenotification check
ups get
ups set
user create
10400317-001 10/2011
Description
Get specified snapshot schedule
Set specified snapshot schedule
List current snapshot schedules
Get snapshot pool properties
Set snapshot pool properties
List current snapshot pools
Start a rollback for the specified snapshot
Get SNMP parameters
Set SNMP parameters
Get current SSH settings
Enable and Disable SSH.
NOTE: Turning off SSH while running the command line
will 'kick' the user off the system and they won't be
able to log back into the command line until SSH is
re-enabled via the SnapServer Web Management
Interface.
Create a tar file of syswrapper and all third-party logs
Create a tar file of Snap EDR logs
Create a tar file of S2Sv2 logs
Create a tar file of syswrapper only
Available only before storage is configured. Specifies storage
type.
Available only before storage is configured. Allows you to
bypass the confirmation prompt.
Get system status information for the server
List the SCSI tape devices
Display current SCSI tape device settings
Update SCSI tape device settings
Get TCP/IP parameters
Set TCP/IP parameters.
NOTE: Changing the parameters of the Ethernet interface
over which the user is currently running the
SSH/command line session may result in the user
being disconnected.
Create a bond and set TCP/IP properties.
Remove a TCP/IP bond.
Get update notification properties
Set update notification properties
Check to see if updates are available
Get UPS settings and status
Set UPS settings
Create a local user
©2010-11 Overland Storage, Inc.
E – Command Line Interface
E-10