Overland Storage SnapServer Administrator's Manual page 14

SnapServer 7.0 Administrator's Guide
Feature
System Management
RAID Options (Traditional RAID)
DHCP Support
10400317-001 10/2011
Specification
• Browser-based administration tool called the Web Management
Interface
• SnapCLI for volume system deployment
• SnapServer Manager utility (platform independent)
• SNMP (MIB II and Host Resource MIB)
• User disk quotas for Windows, Unix/Linux, Mac, FTP/FTPS
(Traditional RAID only)
• Group disk quotas for Unix/Linux (Traditional RAID only)
• Environmental monitoring
• Email event notification and SNMP trap notification
• Data importation (migration)
• RAID 0 (drive striping): Large virtual drive with data striped across
all drives of the array to provide maximum performance with no
loss in usable capacity. Does not provide data protection.
• RAID 1 (drive mirroring): One or more drives duplicate one drive for
maximum data protection. Available only on systems with two (2)
or more drives.
• RAID 5 (drive striping with parity): For each array, the size of one
drive is reserved for parity. Provides good performance and space
utilization with one-drive fault tolerance. Available only on systems
with four (4) or more drives.
• RAID 6 (drive striping with two parity drives): Like a RAID 5 except
that two drives are used for parity rather than one. Provides
moderate performance and reasonable space utilization with two-
drive fault tolerance. Available only on systems with four (4) or
more drives.
• RAID 10 (striped mirroring): A combination of RAID 0 and RAID 1.
Provides high performance and fault tolerance. Available only on
systems with four (4) or more drives.
• Global or local spare support
• Instant Capacity Expansion (ICE): Logically groups RAIDs for
dynamic online scalability.
Supports Dynamic Host Configuration Protocol (DHCP) for automatic
assignment of IP addresses
©2010-11 Overland Storage, Inc.
1 – Overview
1-3