SnapServer 7.0 Administrator's Guide
To Create the Storage Pool
In order to create a new storage pool, you must have at least one empty drive, and the
chassis in which the drive is located cannot have a storage pool already present.
1. At the Storage Pools page ( Storage > Storage Pools ), click the create link in the
Status
2. At the Create Storage Pool page:
• Select the desired type of parity mode from the options provided.
• From the drop-down list, choose the percentage of space for the snapshot pool.
3. Click Create Storage Pool.
4. At the confirmation page, click Create Storage Pool again.
Progress is shown in the Status column.
5. When created, click OK to continue.
6. You are returned to the Storage Pools page where the Status shows
Refresh to see the current Status and determine when the resync is complete.
NOTE: The storage pool is currently being synchronized in the background. Do not apply a heavy
Storage Pool Deletion
CAUTION:
The data cannot be recovered.
10400317-001 10/2011
column.
load to this storage pool until the synchronization operation is complete.
Deleting the storage pool deletes all volumes and their data on the storage pool.
©2010-11 Overland Storage, Inc.
4 – DynamicRAID Storage
. Click
Resync
4-4