General Information; Tcp/Ip Configuration - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
Once you log in, the Initial Setup Wizard runs.
The Initial Setup Wizard consists of several web pages that allow you to change the server
name, set the date and time, set the administrator password, configure TCP/IP settings for
the primary Ethernet port (by default Ethernet 1), and configure storage space:
•

General Information

•

TCP/IP Configuration

• RAID Type Selection
•
Available Disks Detected
• Storage Configuration
•
Registration Page
10400317-001 10/2011
©2010-11 Overland Storage, Inc.
2 – Server Setup and Options
2-2