Overland Storage SnapServer Administrator's Manual page 149

SnapServer 7.0 Administrator's Guide
To Create a Local User
1. On the Local Users page, click Create.
2. On the Create Local User page that opens, enter the requested information:
Option
Name
Full Name
Password
Password Verify
User ID (UID)
Disable User Login
Exempt from Password
Expiration and Character
Requirements
Grant Admin Rights To
This User
3. Click Create User again to create the user account.
10400317-001 10/2011
Description
Use up to 50 alphanumeric characters and the underscore.
Use up to 49 alphanumeric characters (includes spaces). Input in this
field is optional.
Passwords are case-sensitive. Use up to 15 alphanumeric characters
without spaces.
Type the chosen password again for verification.
Displays the user identification number assigned to this user. Alter as
necessary. For information on available UID ranges, see
Assignments" on page 7-3.
Select this checkbox to disable the user login. The user's information
will remain in the system, but login rights will be denied. The user login
can be enabled by deselecting the checkbox.
This checkbox can also be used to enable a user locked out by the
Disable login after n attempts password policy.
This checkbox is only visible if Password Policy is enabled.
Select this checkbox to exempt this user from password expiration and
character requirement policies.
Select this checkbox to allow the user access to the Web Management
Interface and SSH (for access to the CLI and backup agent
installation.
©2010-11 Overland Storage, Inc.
7 – Security Options
"UID and GID
7-21