Installing The Symantec Backup Exec Ralus Agent - Overland Storage SnapServer Administrator's Manual

Hide thumbs Also See for SnapServer:
Table of Contents

Advertisement

SnapServer 7.0 Administrator's Guide
Install CA ARCserve Agent
1. To install the agent files, enter the following command at the prompt, and press
rpm --nodeps -Uvh babagtux.rpm *lic*.rpm
2. Once the license is installed, run the Install script by entering the following command
at the prompt and pressing
./install
Answer the prompts using the defaults.
NOTE: You are installing the Linux Client Agent.
3. To change to the agent directory, enter the following command, and press
cd /opt/CA/BABuagent/
4. To run the setup program, enter the following command, and press
./uagentsetup
The ARCserve agent is now installed.
5. Enter the following command to run the script that will edit the agent.cfg file:
fix-arcserv
6. Close the SSH client and return to the Web Management Interface. To start the
newly installed backup agent, navigate to the Maintenance > Shutdown/Restart page,
and click Restart.
7. Delete the agent files you copied to the SnapServer because they are no longer
needed.
8. To verify the success of the installation, use your backup management software to
configure and run a test backup.
Uninstall ARCserve Agent
1. If you still have the tar or install directory that you copied to the SnapServer when
you installed the ARCserve Agent, the uninstall script will be in that directory. If you
do not have the directory or tar, copy the files again from the ARCserve CD or get
them from Computer Associates.
2. Make sure you have the script
./uninstall
NOTE: Choose Option 1 to uninstall.
3. Uninstall the license
rpm -e ca-lic
4. Verify that ARCserve Agent has been uninstalled by typing the following and
verifying that you do not see the agents:
rpm -qa | grep BAB

Installing the Symantec Backup Exec RALUS Agent

To install the Backup Exec RALUS agent, follow these procedures.
Prepare the SnapServer
1. Connect to the server over SSH.
10400317-001 10/2011
:
Enter
. Type the following and follow the prompts:
uninstall
by typing the following:
rpm
©2010-11 Overland Storage, Inc.
B – Backup Solutions
:
Enter
:
Enter
:
Enter
B-6

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents