Email Notification - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Email Notification

To configure the server to send email alerts in response to system events, navigate to the
System > Email Notification
IP address; and (2) the email address of each recipient to receive an alert.
Configuring Email Notification
Edit settings as described in the following table, and then click OK.
10400317-001 10/2011
page. To set up email alerts, you will need: (1) the SMTP server's
Option Description
Enable Email To enable email notification, check the Enable Email Notification
Notification check box.
SMTP Server Enter a valid SMTP server IP address or host name.
SMTP Port Enter a port number for the SMTP server or accept the default.
Use Authenticated Check this box to require authentication when an email is sent to
SMTP the SMTP server by the SnapServer. Provide an authentication
User Name and Password in the fields that appear when the
feature is enabled.
Use Secure Check this box to encrypt emails from the SnapServer. STARTTLS
Connection and TLS/SSL encryption protocols are supported.
Email Address of Choose:
Sender:
• The default address (servername@domain) where the domain
is the DNS domain name. If there is no DNS domain name,
then the server's IP address for Eth0 will be used
(servername@ipaddress)
• Specify a specific sender.
©2010-11 Overland Storage, Inc.
9 – Maintenance
9-16