Overland Storage SnapServer Administrator's Manual page 190

SnapServer 7.0 Administrator's Guide
• Switch User (Logout) (
Login
• Administration
page
If any of the following conditions are present, you may not be able to access the Home page:
• Require Web Authentication is enabled (via Network > Web > Require Web
Authentication)
• The server has not completed the Initial Setup Wizard (if this is the case, you will not
be able to access the Administration page of the Web Management Interface either).
• Web Root is enabled (via Network > Web > Enable Web Root ).
If you cannot access the Administration page, you can try the following:
• Point your browser to
• From any page in the Web Management Interface, click
log in.)
10400317-001 10/2011
) – Automatically logs out the current user and displays the
page for the new user to gain access to the SnapServer.
– Displays the Administration page (see
10-4). You will be prompted to log in if you have not already done so.
and you do not have a valid user name and password on the server.
http://<servername or IP address>
©2010-11 Overland Storage, Inc.
10 – Misc. Options
"Administration Page" on
. (You may be prompted to
10-3