Snap Finder - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Snap Finder

Snap Finder (
on your network and on a remote network segment if so configured, and shows the current
status. Click the server name (if you have IP address resolution) or IP address of a server to
access it through the Web Management Interface.
NOTE: You can sort the columns (ascending or descending order) by clicking the column head.
To enable remote discovery of SnapServers on a different subnet or to display a warning
icon for servers with an enabled Ethernet port that has no link, click the Properties button
to open the Snap Finder Properties page.
The following table details the columns in the table:
Identification
Server Name
Status
IP Address
OS Version
Model
Number
Avail Cap
Total Cap
10400317-001 10/2011
) is a powerful tool that lists all the SnapServer and REO 4600 appliances
Description
Current name of the server. The default server name is
SNAPnnnnnnn, where nnnnnnn is your server number (for
example, SNAP1234567).
The status of the server (for example, OK, fan failure, or power
failure).
The IP address of the server.
The version of GuardianOS currently loaded on the
SnapServer.
The SnapServer model.
The Server Number derived from the MAC address of the
primary Ethernet port, used as part of the default server
name.
The available capacity on the server.
The total capacity on the server.
©2010-11 Overland Storage, Inc.
10 – Misc. Options
10-6