Server Status And Site Map - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Server Status and Site Map

SnapServer appliances running GuardianOS 7.0 use a web-based graphical user interface
(GUI) called the Web Management Interface. It supports most common web browsers,
including Internet Explorer 7 and higher, Firefox 3.6 and higher, Apple Safari 5, and
Google Chrome 11 and higher. JavaScript must be enabled in the browser.
When connecting to the server with a web browser, the Home page of the Web Management
Interface is displayed. This page has the shared drives listed at the top, three options
shown below that, and special navigation buttons displayed on the right side of the title bar
(see the next table).
NOTE: If you haven't gone through the initial setup or authentication is required, you may be
IMPORTANT: Using the Traditional RAID option, you must log in before you can access the
default Home page. For the DynamicRAID option, the Home page comes up first and you
must log in before you can access the Administration page.
The Home page displays the following icons and options:
10400317-001 10/2011
prompted to log in when you first access the Web Management Interface.
Icons & Options Description
Change Password Click to access the password change page. Passwords are case
sensitive. Use up to 15 alphanumeric characters.
Switch User Click to log out and open the login dialog box to log in as a
different user.
Administration Click to administer the server.
©2010-11 Overland Storage, Inc.
2 – Server Setup and Options
2-12