Disaster Recovery - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
• Reset To Default ACLs For Volume: < volume name > – Resets the file and directory
security on selected volumes. Volumes are all set to the Windows/Mixed security
model. All files and directories are set to the Windows personality with a Windows
ACL that gives full access to Administrators, read access to Everyone, file/directory
create access to Everyone (for directories), and full access to the owner (owners are
retained in the reset operation).
NOTE: Rebooting or shutting down the server in the middle of an ACL reset will halt the
• Reset Storage Environment to Factory Defaults – Storage configuration is reset
and the Initial Wizard is displayed when the SnapServer is restarted.
entered before the process begins.
NOTE: Use this option to change your RAID configuration standard from DynamicRAID to

Disaster Recovery

Disaster recovery entails creating the files you need to recover a SnapServer's configuration
information, such as network and RAID configurations, as well as volume-specific
information, such as ACLs and quota settings.
NOTE: Disaster recovery does not include user data. Backups of user data must be configured
It also includes what to do if all access to the data on a SnapServer is cut off due to a
hardware or software failure. Focus is placed on the procedures for:
10400317-001 10/2011
operation, and it will not recommence on reboot.
CAUTION: ALL USER DATA WILL BE DELETED on the SnapServer when this option is
selected. A confirmation page will be displayed, and the admin password must be
Traditional RAID or vice versa.
and managed separately; see
on backup options.
©2010-11 Overland Storage, Inc.
"Backup Solutions" on page B-1
9 – Maintenance
for detailed information
9-4