Overland Storage SnapServer Administrator's Manual page 43

SnapServer 7.0 Administrator's Guide
2. Click the Status link next to your printer to open the Job Status window and see your
print job queue.
3. Click the Pause Printer button to pause all print jobs.
When the printer is paused, the button becomes a Resume Printer button, which you
can click to resume printing.
To Cancel or Check the Status of Print Jobs
Use this procedure to cancel or check the status of a print job:
1. Navigate to Server > Printing and click the Status link next to your printer to open the
Job Status window and see your print job queue.
2. To cancel a print job, click to put a check in the box next to the job you want to remove
and click Cancel Selected Jobs. You can select to cancel multiple jobs. If you want to
cancel all the listed print jobs, click the Cancel All Jobs button. Click the Refresh button
to update the page with the current list of print jobs.
To Delete a Printer
When you remove a printer, remember to remove its information from both the Web
Management Interface and the client machines.
1. Disconnect the printer cable from the SnapServer.
2. In the Web Management Interface, navigate to Server > Printing . In the list of printers,
the status of printer you just removed should appear as Offline.
3. Click the printer link to open the Edit Printer page, then click the Delete button to
delete the printer.
10400317-001 10/2011
©2010-11 Overland Storage, Inc.
2 – Server Setup and Options
2-24