Launching The Ca Antivirus Gui; Launching The Ca Antivirus Browser Interface; The Local Scanner View - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide
NOTE: The antivirus reinstallation process does not preserve custom antivirus configuration

Launching the CA Antivirus GUI

The CA Antivirus software on SnapServers is enabled by default. Some situations, such as
deleting a volume or performing an upgrade procedure, may require you to re-enable the
software. To learn how the antivirus software interacts with other GuardianOS software
components, see
NOTE: Antivirus functions or options not relevant to the SnapServer have been disabled in the

Launching the CA Antivirus Browser Interface

The first time you connect to the CA Antivirus GUI, it may take from 30 seconds to several
minutes for the application to load, depending on the speed of your connection.
1. If you need to enable the antivirus software, go to SnapExtensions > CA Antivirus , click
the checkbox next to Enable, and click OK.
2. Click the Configure Antivirus link. The splash page opens first, followed momentarily by
the GUI login dialog box.
3. Enter the same administrative user name and password (case-sensitive) you have
established for the GuardianOS Web Management Interface, and then click Login.
The antivirus GUI box opens.

The Local Scanner View

Use the Local Scanner view to scan a SnapServer for infected drives, folders, files, or disks
on demand.
10400317-001 10/2011
settings. Make a note of any such settings before deleting a volume.
"Antivirus Dependencies" on page
configuration GUI;
©2010-11 Overland Storage, Inc.
11 – CA Antivirus Software
11-1.
11-2