Volume Properties - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Volume Properties

At the Volume Properties page, you can edit several items.
To Edit Volume Properties
1. Navigate to Storage > Volumes .
2. Click the volume name in the table.
3. At the Volume Properties page, change the options desired:
• Edit the volume name using up to 32 alphanumeric characters and spaces.
• Specify the maximum size of the volume:
4. When you are done, click OK.
10400317-001 10/2011
• No Limit – this allows the volume to expand as needed incorporating the
remaining unused space on the storage pool.
• Maximum size – Establish a maximum volume size limit by entering the
amount and selecting a unit of measure. The volume then grows in size until it
reaches its maximum. If email notification has been enabled, alerts are sent as
the maximum is approached. (To enable email notification, see
Notification" on page
©2010-11 Overland Storage, Inc.
9-16.)
4 – DynamicRAID Storage
"Email
4-10