Overland Storage SnapServer Administrator's Manual page 37

SnapServer 7.0 Administrator's Guide
To Disable SSH
SSH is enabled by default. To disable SSH, uncheck the Enable SSH check box, and click OK.
To connect to the CLI using SSH
1. Verify that your remote machine has an SSH client application installed.
NOTE: Free or low-cost SSH applications are available from the Internet.
2. Connect to the server using its IP address.
NOTE: Before the Initial Setup Wizard is completed and storage is configured, SnapCLI
3. Log in as
NOTE: SSH v2 is required. If you fail to connect to the server, ensure that your SSH client is
You will automatically be placed in the CLI shell.
NOTE: For information about starting a supported backup agent using SSH, see
10400317-001 10/2011
disables and hides all standard commands and makes only the system command
available. See "Before You Begin" on page
.
admin
configured to connect via SSH v2.
Replication Solutions Table" on page
©2010-11 Overland Storage, Inc.
2 – Server Setup and Options
E-4.
B-1.
"Backup and
2-18