Specify Users In Group; Delete Group; Security Models - Overland Storage SnapServer Administrator's Manual

SnapServer 7.0 Administrator's Guide

Specify Users in Group

Use the Users for Local Group page ( Security > Local Groups > Users ) to make changes to a
local group membership.
To Add or Remove Group Users
1. After creating a new group, or when editing an existing group, add and remove users
by selecting the desired group and clicking Users.
2. Add users by selecting the user and clicking Add.
3. Delete users by selecting the user and clicking Remove.
4. Click OK when finished.

Delete Group

To Delete a Group
1. On the Local Groups page, select the group to be deleted and click Delete.
2. The confirmation page will display. Click Yes to delete the selected group, or click No
to cancel the deletion.

Security Models

There are two security models, Windows/Mixed or Unix. In Traditional RAID, the security
model can be configured on volumes and directories created in the root of volumes; in
DynamicRAID, the security model can be configured on the volume only.
In DynamicRAID, volumes created in the root of a volume have one of these two security
models; in Traditional RAID, volumes and directories created in the root of a volume have
one of these two security models.
10400317-001 10/2011
©2010-11 Overland Storage, Inc.
7 – Security Options
7-28