Redialing Manually; Redialing Automatically; (Job Recall); Redialing When The Line Is Busy - Canon imageCLASS MF5850dn Basic Operation Manual

Redialing When the Line Is Busy

Redialing When the Line Is Busy
If the recipient's line is busy or if there is no answer, you can redial the same fax number
manually or set the machine to redial automatically.

Redialing Manually

You can specify the last three destinations that were
dialed using –
[Tone].
– This feature is available for the MF5850dn.
– For directions on how to recall the last three destinations for
the MF5880dn, see "Using the Send History to Resend Faxes
(Job Recall), " on p. 6-28.
– If <REST. REDIAL/CALL> in <ACCESS TO DEST.> in <SYSTEM
SETTINGS> is set to <ON>,
(See "Restricting Job Recall, " in the e-Manual.)
1
Place documents.
2
Press
3
Press [Redial/Pause] repeatedly.
6-26
, [numeric keys] and
[Redial/Pause] is not available.
[FAX].
4
Confirm that the desired recipient is
displayed.
Ex.
T E L = 1 2 3 X X X X X X X
5
Press [Start].
When you place the documents on the platen
glass, press or
size, then press
When scanning is complete, press [OK] to start
sending.

Redialing Automatically

Automatic redialing enables the machine to
automatically redial the recipient's fax number if the
recipient cannot be reached due to a busy line, or if
a sending error occurs. Auto Redial can be turned
<ON> or <OFF>. If you set <AUTO REDIAL> to
<ON>, you can set how many times the machine
redials the number, and the redial interval. The
default settings are as follows:
– <AUTO REDIAL>: <ON>
<REDIAL TIMES>: <2TIMES>
–
– <REDIAL INTERVAL>: <2MIN.>
– <TX ERROR REDIAL>: <ON>
1
Press [Menu].
to select the document
[Start] for each document.