Job Recall
You can recall the last three destinations, scan settings, and send settings which
have been set, and then send your documents.
IMPORTANT
•
The machine considers any one of the following operations a send job:
- When settings, such as the destination, scan settings, and send settings, are specified,
and then the control panel power switch,
- When the Auto Clear mode activates after send settings are specified
•
The Standard mode is not stored in Recall memory.
NOTE
The three most recent settings that were stored in memory are not erased even when the
power is turned OFF.
1
Press
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-31.
(Start), or
(SEND) ➞ place your originals ➞ press [Recall].
(Reset) is pressed
4-31
Job Recall
4