Snmp Engine Id Settings; Snmp User Table Settings - D-Link DGS-3000 Series Reference Manual

Security Level
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.

SNMP Engine ID Settings

The Engine ID is a unique identifier used for SNMP V3 implementations on the Switch.
To view the following window, click Management > SNMP Settings > SNMP Engine ID Settings as shown below:
The fields that can be configured are described below:
Parameter Description
Engine ID
To change the Engine ID, type the new Engine ID value in the space provided. The SNMP
engine ID displays the identification of the SNMP engine on the Switch. The default value is
suggested in RFC2271. The very first bit is 1, and the first four octets are set to the binary
equivalent of the agent's SNMP management private enterprise number as assigned by IANA
(D-Link is 171). The fifth octet is 03 to indicate the rest is the MAC address of this device. The
sixth to eleventh octets is the MAC address.
Click the Apply button to accept the changes made.
NOTE: The Engine ID length is 10-64 and accepted characters can range from 0 to F.

SNMP User Table Settings

This window displays all of the SNMP User's currently configured on the Switch.
To view the following window, click Management > SNMP Settings > SNMP User Table Settings as shown below:
DGS-3000 Series Gigabit Ethernet Switch Web UI Reference Guide
The Security Level settings only apply to SNMPv3.
NoAuthNoPriv – Specify that there will be no authorization and no encryption of packets
sent between the Switch and a remote SNMP manager.
AuthNoPriv – Specify that authorization will be required, but there will be no encryption
of packets sent between the Switch and a remote SNMP manager.
AuthPriv – Specify that authorization will be required, and that packets sent between the
Switch and a remote SNMP manger will be encrypted.
Figure 3-38 SNMP Engine ID Settings window
Figure 3-39 SNMP User Table Settings window
59