Interface Status - ZyXEL Communications NXC2500 User Manual

Figure 25 Monitor > System Status > Port Statistics > Switch to Graphic View
The following table describes the labels in this screen.
Table 25 Monitor > System Status > Port Statistics > Switch to Graphic View
LABEL
Refresh Interval
Refresh Now
Port Selection
Switch to Grid
View
Mbps
time
TX
RX
Last Update

5.4 Interface Status

This screen lists all of the NXC's interfaces and gives packet statistics for them. If you enabled IPv6
in the Configuration > System > IPv6 screen, you can also view your IPv6 interface status on
this screen. Click Monitor > System Status > Interface Status to access this screen.
Chapter 5 Monitor
DESCRIPTION
Enter how often you want this window to be automatically updated.
Click this to update the information in the window right away.
Select the number of the physical port for which you want to display graphics.
Click this to display the port statistics as a table.
The y-axis represents the speed of transmission or reception.
The x-axis shows the time period over which the transmission or reception occurred
This line represents traffic transmitted from the NXC on the physical port since it was last
connected.
This line represents the traffic received by the NXC on the physical port since it was last
connected.
This field displays the date and time the information in the window was last updated.
NXC Series User's Guide
59