Figure 48 Configuration > Wireless > AP Management > Edit AP List > Edit Port
Each field is described in the following table.
Table 50 Configuration > Wireless > AP Management > Edit AP List > Edit Port
LABEL
Enable
Name
Native VID (PVID)
OK
Cancel
7.3.3 VLAN Add/Edit
Use this screen to create a new VLAN or configure an existing VLAN on the NXC.
To access this screen, click Add or select a VLAN and click the Edit button in the VLAN Member
Configuration table of the Configuration > Wireless > AP Management > Edit AP List
screen.
Chapter 7 Wireless
DESCRIPTION
Select this option to activate the port. Otherwise, deselect it.
This shows the name of the port.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
Enter the PVID from 1 to 4094 for this port.
Click OK to save your changes back to the NXC.
Click Cancel to close the window with changes unsaved.
NXC Series User's Guide
99