Station List - ZyXEL Communications NXC2500 User Manual

The following table describes the labels in this screen.
Table 41 Monitor > Wireless > ZyMesh > ZyMesh Link Info
LABEL
#
Description
IP Address
MAC Address
Root AP MAC
Hop
Uplink AP Role
Uplink AP Info
SSID Name
Signal Strength
Tx Rate
Rx Rate
Link Up Time

5.14 Station List

Use this screen to view statistics pertaining to the associated stations (or "wireless clients"). Click
Monitor > Wireless > Station Info > Station List to access this screen.
Figure 39 Monitor > Wireless > Station Info > Station List
Chapter 5 Monitor
DESCRIPTION
This is the index number of the managed AP (in repeater mode) in this list.
This is the descriptive name of the managed AP (in repeater mode).
This is the IP address of the managed AP (in repeater mode).
This is the MAC address of the managed AP (in repeater mode).
This is the MAC address of the root AP to which the managed AP is connected wirelessly.
This is the hop count of the managed AP. For example, "1" means the managed AP is
connected to a root AP directly. "2" means there is another repeater AP between the
managed AP and the root AP.
This shows whether the managed AP to which this managed AP is connected wirelessly is
acting as a root AP or repeater in a ZyMesh.
This shows the information about the managed AP to which this managed AP is connected
wirelessly.
This indicates the name of the wireless network (SSID) the managed AP uses to associated
with another managed AP.
This is the signal strength of the wireless connection between the managed AP and a root
AP or repeater.
This is the maximum transmission rate of the root AP or repeater to which the managed AP
is connected.
This is the maximum reception rate of the root AP or repeater to which the managed AP is
connected.
This displays the time the managed AP first associated with the root AP or repeater.
NXC Series User's Guide
82