ZyXEL Communications NXC2500 User Manual page 403

Table 205 WLAN Logs
LOG MESSAGE
Wlan %s is enabled.
Wlan %s is disabled.
Wlan %s has been
configured.
Interface %s has been
configured.
Interface %s has been
deleted.
Create interface %s
has failed. Wlan
device does not exist.
System internal error.
No 802.1X or WPA
enabled!
System internal error.
Error configuring WPA
state!
System internal error.
Error enabling WPA/
802.1X!
Station has
associated. Interface:
%s, MAC: %s.
WPA or WPA2 enterprise
EAP timeout.
Interface: %s, MAC:
%s.
Station association
has failed. Maximum
associations have
reached the maximum
number. Interface: %s,
MAC: %s.
WPA authentication has
failed. Interface: %s,
MAC: %s.
Incorrect password for
WPA or WPA2 enterprise
internal
authentication.
Interface: %s, MAC:
%s.
Appendix A Log Descriptions
DESCRIPTION
The WLAN (IEEE 802.11 b and or g) feature has been turned on. %s is the
slot number where the WLAN card is or can be installed.
The WLAN (IEEE 802.11 b and or g) feature has been turned off. %s is the
slot number where the WLAN card is or can be installed.
The WLAN (IEEE 802.11 b and or g) feature's configuration has been
changed. %s is the slot number where the WLAN card is or can be installed.
The configuration of the specified WLAN interface (%s) has been changed.
The specified WLAN interface (%s) has been removed.
The wireless device failed to create the specified WLAN interface (%s).
Remove the wireless device and reinstall it.
IEEE 802.1x or WPA is not enabled.
The NXC was not able to configure the wireless device to use WPA. Remove
the wireless device and reinstall it.
The NXC was not able to enable WPA/IEEE 802.1X.
A wireless client with the specified MAC address (second %s) associated with
the specified WLAN interface (first %s).
There was an EAP timeout for a wireless client connected to the specified
WLAN interface (first %s). The MAC address of the wireless client is listed
(second %s).
A wireless client with the specified MAC address (second %s) failed to connect
to the specified WLAN interface (first %s) because the WLAN interface already
has its maximum number of wireless clients.
A wireless client used an incorrect WPA key and thus failed to connect to the
specified WLAN interface (first %s). The MAC address of the wireless client is
listed (second %s).
A wireless client used an incorrect WPA or WPA2 user password and failed
authentication by the NXC's local user database while trying to connect to the
specified WLAN interface (first %s). The MAC address of the wireless client is
listed (second %s).
NXC Series User's Guide
403