ZyXEL Communications NXC2500 User Manual page 204

Table 101 Configuration > Object > User/Group > Setting (continued)
LABEL DESCRIPTION
User idle This is applicable for access users.
timeout
This field is effective when Enable user idle detection is checked. Type the number of
minutes each access user can be logged in and idle before the NXC automatically logs
out the access user.
User Logon Settings
Limit the Select this check box if you want to set a limit on the number of simultaneous logins by
number of
admin users. If you do not select this, admin users can login as many times as they
simultaneous
want at the same time using the same or different IP addresses.
logons for
administration
account
Maximum This field is effective when Limit ... for administration account is checked. Type the
number per
maximum number of simultaneous logins by each admin user.
administration
account
Limit the Select this check box if you want to set a limit on the number of simultaneous logins by
number of
non-admin users. If you do not select this, access users can login as many times as
simultaneous
they want as long as they use different IP addresses.
logons for
access account
Maximum This field is effective when Limit ... for access account is checked. Type the
number per
maximum number of simultaneous logins by each access user.
access account
User Lockout
Settings
Enable logon Select this check box to set a limit on the number of times each user can login
retry limit
unsuccessfully (for example, wrong password) before the IP address is locked out for a
specified amount of time.
Maximum retry This field is effective when Enable logon retry limit is checked. Type the maximum
count
number of times each user can login unsuccessfully before the IP address is locked out
for the specified lockout period. The number must be between 1 and 99.
Lockout period This field is effective when Enable logon retry limit is checked. Type the number of
minutes the user must wait to try to login again, if logon retry limit is enabled and the
maximum retry count is reached. This number must be between 1 and 65,535 (about
45.5 days).
Dynamic Guest
Settings
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify
the entry's settings.
Remove To remove an entry, select it and click Remove. The NXC confirms you want to remove
it before doing so. Removing a group does not remove the user accounts in the group.
Object Reference Select an entry and click Object Reference to open a screen that shows which settings
use the entry.
# This field is a sequential value, and it is not associated with a specific user group.
Group Name This field displays the name of each dynamic guest group.
Description This field displays the description for each dynamic guest group.
Account Deleted Select this check box to remove the dynamic guest accounts from the Monitor >
After Expiration System Status > Dynamic Guest screen when they expire.
Dynamic Guest Enter the notes (such as the SSID and security key the dynamic guests can use to
Note access the network services) you wan to display in the paper along with the account
information you print out for dynamic guest users. You can enter up to 1024 ASCII
characters.
Chapter 17 User/Group
NXC Series User's Guide
204