Station Count Of Ap - ZyXEL Communications NXC2500 User Manual

Table 34 Monitor > Wireless > AP Information > AP List (continued)
LABEL
Last Off-line
Time
LED Status
Refresh
The following table describes the icons in this screen.
Table 35 Monitor > Wireless > AP Information > AP List Icons
LABEL

5.11.1 Station Count of AP

Use this screen to look at configuration information, port status and station statistics for the
connected AP. To access this screen, select an entry and click the More Information button in the
AP List screen.
DESCRIPTION
This displays the most recent time the AP went off-line. N/A displays if the AP has either
not come on-line or gone off-line since the NXC last started up.
This displays the AP LED status.
N/A displays if the AP does not support LED suppression mode and/or have a locator LED
to show the actual location of the AP.
A gray LED icon signifies that the AP LED suppression mode is enabled. All the LEDs of the
AP will turn off after the AP is ready.
A green LED icon signifies that the AP LED suppression mode is disabled and the AP LEDs
stay lit after the AP is ready.
A sun icon signifies that the AP's locator LED is blinking.
A circle signifies that the AP's locator LED is extinguished.
Click this button to update the information in the screen.
DESCRIPTION
This AP is not on the management list.
This AP is on the management list and online.
This AP is in the process of having its firmware updated.
This AP is on the management list but offline.
This indicates one of the following cases:
• This AP has a runtime management VLAN ID setting that conflicts with the VLAN ID setting on
the Access Controller (the NXC).
• A setting the NXC assigns to this AP does not match the AP's capability.
• Packets sent out on a LAN port of this AP loop back to the AP.
NXC Series User's Guide
Chapter 5 Monitor
72