ZyXEL Communications NXC2500 User Manual page 63

Figure 27 Monitor > System Status > Traffic Statistics
There is a limit on the number of records shown in the report. See
information. The following table describes the labels in this screen.
Table 27 Monitor > System Status > Traffic Statistics
LABEL DESCRIPTION
Data Collection
Collect Statistics Select this to have the NXC collect data for the report. If the NXC has already been
collecting data, the collection period displays to the right. The progress is not tracked here
real-time, but you can click the Refresh button to update it.
Apply Click Apply to save your changes back to the NXC.
Reset Click Reset to return the screen to its last-saved settings.
Statistics
Interface Select the interface from which to collect information. You can collect information from
Ethernet or VLAN interfaces.
Sort By Select the type of report to display. Choices are:
Host IP Address/User - displays the IP addresses or users with the most traffic and how
much traffic has been sent to and from each one.
Service/Port - displays the most-used protocols or service ports and the amount of traffic
for each one.
Web Site Hits - displays the most-visited Web sites and how many times each one has
been visited.
Each type of report has different information in the report (below).
Refresh Click this button to update the report display.
Flush Data Click this button to discard all of the screen's statistics and update the report display.
These fields are available when the report type is Host IP Address/User.
# This field is the rank of each record. The IP addresses and users are sorted by the amount
of traffic.
Chapter 5 Monitor
NXC Series User's Guide
63
Table 28 on page 64 for more