Guest Manager Login Example - ZyXEL Communications NXC2500 User Manual

Figure 115 User Aware Login
The following table describes the labels in this screen.
Table 104 User Aware Login
LABEL
User-defined
lease time (max
... minutes)
Renew
Updating lease
time
automatically
Remaining time
before lease
timeout
Remaining time
before auth.
timeout
Remaining time
before session
timeout

17.4.4 Guest Manager Login Example

To create dynamic guest accounts, enter the guest-manager account information in the Web
Configurator login screen. After you log in successfully, the following guest manager screen
appears.
Chapter 17 User/Group
DESCRIPTION
Access users can specify a lease time shorter than or equal to the one that you specified.
The default value is the lease time that you specified.
Access users can click this button to reset the lease time, the amount of time remaining
before the NXC automatically logs them out. The NXC sets this amount of time according
to the
• User-defined lease time field in this screen.
• Lease time field in the User Add/Edit screen.
• Lease time field in the Setting > Edit screen.
This box appears if you checked the Allow renewing lease time automatically box in
the Setting screen. Access users can select this check box to reset the lease time
automatically 30 seconds before it expires. Otherwise, access users have to click the
Renew button to reset the lease time.
This field displays the amount of lease time that remains, though the user might be able to
reset it.
This field displays the amount of time that remains before the NXC automatically logs the
access user out, regardless of the lease time.
This field displays how much longer the user can use the session before the NXC
automatically logs the access user out.
NXC Series User's Guide
207