Figure 71 Configuration > Network > Routing > Policy Route > Add/Edit
The following table describes the labels in this screen.
Table 68 Configuration > Network > Routing > Policy Route > Add/Edit
LABEL
DESCRIPTION
Show / Hide
Click this button to display a greater or lesser number of configuration fields.
Advanced
Settings
Create new
Use this to configure any new settings objects that you need to use in this screen.
Object
Configuration
Enable
Select this to activate the policy.
Description
Enter a descriptive name of up to 60 printable ASCII characters for the policy.
Criteria
User
Select a user name or user group from which the packets are sent.
Incoming
Select where the packets are coming from; any, an interface, or the NXC itself
(EnterpriseWLAN). For an interface, you also need to select the individual interface.
Please select one
This field displays only when you set Incoming to Interface. Select an interface from
member
which the packets are sent.
Source Address
Select a source IP address object from which the packets are sent.
Chapter 9 Policy and Static Routes
NXC Series User's Guide
142