ZyXEL Communications NXC2500 User Manual page 76

The following table describes the labels in this screen.
Table 37 Monitor > Wireless > AP Information > AP List > Config AP
LABEL DESCRIPTION
Create new Object Use this menu to create a new Radio Profile, MON Profile, SSID Profile or ZyMesh
Profile object to associate with this AP.
MAC This displays the MAC address of the selected AP.
Model This field displays the AP's hardware model information. It displays N/A (not applicable)
only when the AP disconnects from the NXC and the information is unavailable as a
result.
Description Enter a description for this AP. You can use up to 31 characters, spaces and underscores
allowed.
The system automatically generates a default name in the format of AP-xxxxxxxxxxxx
(where xxxxxxxxxxxx is the AP's MAC address).
Group Setting Select an AP group to which you want this AP to belong.
Radio 1/2 Setting
Override Group Select this option to overwrite the AP radio settings with the settings you configure here.
Radio Setting
OP Mode Select the operating mode for radio 1 or radio 2.
AP Mode means the AP can receive connections from wireless clients and pass their data
traffic through to the NXC to be managed (or subsequently passed on to an upstream
gateway for managing).
MON Mode means the AP monitors the broadcast area for other APs, then passes their
information on to the NXC where it can be determined if those APs are friendly or rogue.
If an AP is set to this mode it cannot receive connections from wireless clients.
Root AP means the radio acts as an AP and also supports the wireless connections with
other APs (in repeater mode) to form a ZyMesh/WDS to extend its wireless network.
Repeater AP means the radio can establish a wireless connection with other APs (in
either root AP or repeater mode).
Note: To prevent bidge loops, do NOT set both radios on a managed AP to Repeater AP
Note: The root AP and repeater AP(s) in a ZyMesh must use the same country code and
Note: Ensure you restart the managed AP after you change its operating mode.
Radio 1/2 AP Select an AP profile from the list. If no profile exists, you can create a new one through
Profile the Create new Object menu.
Radio 1/2 Profile Select a monitor mode profile profile from the list. If no profile exists, you can create a
new one through the Create new Object menu.
Radio 1/2 ZyMesh This field is available only when the radio is in Root AP or Repeater AP mode.
Profile
Select the ZyMesh profile the radio uses to connect to a root AP or repeater.
Override Group Select this option to overwrite the AP output power setting with the setting you configure
Output Power here.
Setting
Output Power Enter the output power of the AP.
Override Group Select this option to overwrite the AP SSID profile setting with the setting you configure
SSID Setting here.
This section allows you to associate an SSID profile with the radio.
Chapter 5 Monitor
mode.
AP radio profile settings in order to communicate with each other.
NXC Series User's Guide
76