Log Category Settings - ZyXEL Communications NXC2500 User Manual

The following table describes the labels in this screen.
Table 176 Configuration > Log & Report > Log Settings > Edit (Remote Server)
LABEL
Log Settings for
Remote Server
Active
Log Format
Server
Address
Log Facility
Active Log
Selection
#
Log Category
Selection
OK
Cancel

29.3.5 Log Category Settings

This screen allows you to view and to edit what information is included in the system log, USB
storage, e-mail profiles, and remote servers at the same time. It does not let you change other log
settings (for example, where and how often log information is e-mailed or remote server names).
To access this screen, go to the Log Settings Summary screen, and click the Log Category
Settings button.
Chapter 29 Log and Report
DESCRIPTION
Select this check box to send log information according to the information in this section.
You specify what kinds of messages are included in log information in the Active Log
section.
This field displays the format of the log information. It is read-only.
VRPT/Syslog - ZyXEL's Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
Type the server name or the IP address of the syslog server to which to send log
information.
Select a log facility. The log facility allows you to log the messages to different files in the
syslog server. Please see the documentation for your syslog program for more information.
Use the Selection drop-down list to change the log settings for all of the log categories.
disable all logs (red X) - do not send the remote server logs for any log category.
enable normal logs (green check mark) - send the remote server log messages and
alerts for all log categories.
enable normal logs and debug logs (yellow check mark) - send the remote server log
messages, alerts, and debugging information for all log categories.
This field is a sequential value, and it is not associated with a specific address.
This field displays each category of messages. It is the same value used in the Display
and Category fields in the View Log tab. The Default category includes debugging
messages generated by open source software.
Select what information you want to log from each Log Category (except All Logs; see
below). Choices are:
disable all logs (red X) - do not log any information from this category
enable normal logs (green check mark) - log regular information and alerts from this
category
enable normal logs and debug logs (yellow check mark) - log regular information,
alerts, and debugging information from this category
Click this to save your changes and return to the previous screen.
Click this to return to the previous screen without saving your changes.
NXC Series User's Guide
339