Cpu Usage - ZyXEL Communications NXC2500 User Manual

Table 18 Dashboard (continued)
LABEL
Un-Management
AP
All Station
Station
All Sensed Device
Un-Classified AP
Rogue AP
Friendly AP
ZyMesh AP
Information
All ZyMesh AP
Online ZyMesh
AP
Offline ZyMesh
AP

4.2.1 CPU Usage

Use this screen to look at a chart of the NXC's recent CPU usage. To access this screen, click Show
CPU Usage in the dashboard.
Figure 19 Dashboard > CPU Usage
The following table describes the labels in this screen.
Table 19 Dashboard > CPU Usage
LABEL
Chapter 4 Dashboard
DESCRIPTION
This displays the number of non-managed APs.
This section displays a summary of connected stations. Click the link to go to the
Station Info > Station List screen.
This displays the number of stations currently connected to the network.
This sections displays a summary of all wireless devices detected by the network. Click
the link to go to the Rogue AP > Detected Device screen.
This displays the number of detected unclassified APs.
This displays the number of detected rogue APs.
This displays the number of detected friendly APs.
This shows a summary of managed APs that act as a root AP or a repeater to form a
ZyMesh/WDS.
This section displays a summary for all ZyMesh APs. Click the link to go to the Monitor
> Wireless > All ZyMesh AP > ZyMesh Link Info screen.
This displays the number of currently connected ZyMesh APs.
This displays the number of currently offline ZyMesh APs.
DESCRIPTION
The y-axis represents the percentage of CPU usage.
The x-axis shows the time period over which the CPU usage occurred
NXC Series User's Guide
51