ZyXEL Communications NXC2500 User Manual page 291

To change your NXC's time based on your local time zone and date, click Configuration > System
> Date/Time. The screen displays as shown. You can manually set the NXC's time and date or
have the NXC get the date and time from a time server.
Figure 167 Configuration > System > Date/Time
The following table describes the labels in this screen.
Table 152 Configuration > System > Date/Time
LABEL DESCRIPTION
Current Time and
Date
Current Time This field displays the present time of your NXC.
Current Date This field displays the present date of your NXC.
Time and Date
Setup
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, time zone and daylight saving at the same time, the time zone and daylight
saving will affect the new time and date you entered. When you enter the time settings
manually, the NXC uses the new setting once you click Apply.
New Time This field displays the last updated time from the time server or the last time configured
(hh:mm:ss) manually.
When you set Time and Date Setup to Manual, enter the new time in this field and
then click Apply.
New Date This field displays the last updated date from the time server or the last date configured
(yyyy-mm-dd) manually.
When you set Time and Date Setup to Manual, enter the new date in this field and
then click Apply.
Chapter 28 System
NXC Series User's Guide
291