Config Ap - ZyXEL Communications NXC2500 User Manual

Table 36 Monitor > Wireless > AP Information > AP List > AP Information (continued)
LABEL
Status
PVID
Up Time
VLAN
Configuration
Name
Status
VID
Member
Station Count
Time
Last Update

5.11.2 Config AP

Use this screen to change the group and radio, VLAN, and port settings of the connected AP. To
access this screen, select an entry and click the Config AP button in the AP List screen.
Chapter 5 Monitor
DESCRIPTION
This field displays the current status of each physical port on the AP.
Down - The port is not connected.
Speed / Duplex - The port is connected. This field displays the port speed and duplex
setting (Full or Half).
This shows the port's PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port
so that the frames are forwarded to the VLAN group that the tag defines.
This field displays how long the physical port has been connected.
This shows the name of the VLAN.
This displays whether or not the VLAN is activated.
This shows the VLAN ID number.
This field displays the Ethernet port(s) that is a member of this VLAN.
The y-axis represents the number of connected stations.
The x-axis shows the time over which a station was connected.
This field displays the date and time the information in the window was last updated.
NXC Series User's Guide
74