Ipv6 - ZyXEL Communications NXC2500 User Manual

Figure 195 Configuration > System > Language
The following table describes the labels in this screen.
Table 170 Configuration > System > Language
LABEL
Language Setting
Apply
Reset

28.14 IPv6

Click Configuration > System > IPv6 to open the following screen. Use this screen to enable
IPv6 support on the NXC.
Figure 196 Configuration > System > IPv6
The following table describes the labels in this screen.
Table 171 Configuration > System > IPv6
LABEL
Enable IPv6
Apply
Reset
Chapter 28 System
DESCRIPTION
Select a display language for the NXC's Web Configurator screens. You also need to open
a new browser session to display the screens in the new language.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
DESCRIPTION
Select this to have the NXC support IPv6 and make IPv6 settings be available on the
screens that the functions support, such as the Configuration > Network > Interface
> Ethernet, and VLAN screens. The NXC discards all IPv6 packets if you clear this check
box.
Click Apply to save your changes back to the NXC.
Click Reset to return the screen to its last-saved settings.
NXC Series User's Guide
327