ZyXEL Communications NXC2500 User Manual page 398

Table 200 System Logs (continued)
LOG MESSAGE
Clear arp cache
successfully.
Client MAC address is
not an Ethernet
address
DHCP request received
via interface
%s (%s:%s), src_mac:
%s with requested IP:
%s
IP confliction is
detected. Send back
DHCP-NAK.
Clear ARP cache done
Set manual time has
succeeded. Current
time is %s
NTP update successful,
current time is %s
NTP update failed
Device is rebooted by
administrator!
Insufficient memory.
Update the profile %s
has failed because of
strange server
response.
Update the profile %s
has succeeded because
the IP address of FQDN
%s was not changed.
Update the profile %s
has succeeded.
Collect Diagnostic
Information has failed
- Server did not
respond.
Collect Diagnostic
Infomation has
succeeded.
Port %d is up!!
Port %d is down!!
Appendix A Log Descriptions
DESCRIPTION
The ARP cache was cleared successfully.
A client MAC address is not an Ethernet address.
The device received a DHCP request through the specified interface.
IP conflict was detected. Send back DHCP-NAK.
Clear ARP cache done.
The device date and time was changed manually.
%s is the date and time.
The device successfully synchronized with a NTP time server .
%s is the date and time.
The device was not able to synchronize with the NTP time server successfully.
An administrator restarted the device.
Cannot allocate system memory.
Update profile failed because the response was strange, %s is the profile
name.
Update profile succeeded, because the IP address of profile is unchanged, %s
is the profile name.
Update profile succeeded, %s is the profile name.
There was an error and the diagnostics were not completed.
The diagnostics scripts were executed successfully.
The specified port has it's link up.
The specified port has it's link down.
NXC Series User's Guide
398