ZyXEL Communications NXC2500 User Manual page 407

Table 212 CAPWAP Server Logs
LOG MESSAGE
WLAN Controller Start.
Registration Type:%s
WLAN Controller Reset.
Registration Type:%s
WLAN Controller End.
AP Connect.
MAC:%02x%02x%02x%02x%02x%02x,
Name:%s,Model:%s
Model of AP is fake.
MAC:%02x%02x%02x%02x%02x%02x,
Model ID:%x
AP Disconnect.
MAC:%02x%02x%02x%02x%02x%02x,
Name:%s, Reason:%s in %s
State,Model:%s
AP Add.
MAC:%02x%02x%02x%02x%02x%02x,
Model:%s
AP Delete.
MAC:%02x%02x%02x%02x%02x%02x,
Model:%s
Update AP Configure.
MAC:%02x%02x%02x%02x%02x%02x,
Model:%s
Update AP Configure Fail. Wrong
Configure
Apply,MAC:%02x%02x%02x%02x%02x%
02x, Model:%s
Appendix A Log Descriptions
DESCRIPTION
Start the AP management service.
1st %s: Registration Type.
{Always Accept | Manual}
Reset the AP management service.
1st %s: Registration Type.
{Always Accept | Manual}
Stop/End the AP management service.
A Managed AP connected to the CAPWAP Server.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Description.
8th %s: Managed AP Model Name.
A Managed AP's model is not support by CAPWAP Server.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %x: Managed AP's Model ID.
A Managed AP disconnected from the CAPWAP Server.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Description.
8th %s: Managed AP Disconnect Reason.
9th %s: Managed AP Model Name.
Add an AP from un-managed list to managed list.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
Delete an AP from managed list.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
Send configuration to an AP in the managed list.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
Send configuration to an AP in the managed list, but AP sent back
an apply fail response.
1st %02x ~ 6th %02x: Managed AP MAC Address.
7th %s: Managed AP Model Name.
NXC Series User's Guide
407