Port Setting Edit - ZyXEL Communications NXC2500 User Manual

Table 49 Configuration > Wireless > AP Management > Edit AP List (continued)
LABEL
Edit
#
SSID Profile
VLAN Settings
Override Group
VLAN Setting
Force Overwrite
VLAN Config
Management VLAN
ID
As Native VLAN
Port Settings
Override Group LAN
Setting
Port Setting
#
Status
Port
PVID
VLAN Configuration
#
Status
Name
VID
Member
OK
Cancel

7.3.2 Port Setting Edit

Use this screen to enable or disable a port on the managed AP and configure the port's PVID.
To access this screen, select a port and click the Edit button in the Port Setting table of the
Configuration > Wireless > AP Management > Edit AP List screen.
Chapter 7 Wireless
DESCRIPTION
Select an SSID and click this button to reassign it. The selected SSID becomes editable
immediately upon clicking.
This is the index number of the SSID profile. You can associate up to eight SSID profiles
with an AP radio.
Indicates which SSID profile is associated with this radio profile.
Select this option to overwrite the AP VLAN setting with the setting you configure here.
Select this to have the NXC change the AP's management VLAN to match the
configuration in this screen.
Enter a VLAN ID for this AP.
Select this option to treat this VLAN ID as a VLAN created on the NXC and not one
assigned to it from outside the network.
Select this option to overwrite the AP LAN port settings with the settings you configure
here.
This is the port's index number in this list.
This displays whether or not the port is activated.
This shows the name of the physical Ethernet port on the managed AP.
This shows the port's PVID.
A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a
port so that the frames are forwarded to the VLAN group that the tag defines.
This is the VLAN's index number in this list.
This displays whether or not the VLAN is activated.
This shows the name of the VLAN.
This shows the VLAN ID number.
This field displays the Ethernet port(s) that is a member of this VLAN.
Click OK to save your changes back to the NXC.
Click Cancel to close the window with changes unsaved.
NXC Series User's Guide
98