ZyXEL Communications NXC2500 User Manual page 260

Figure 152 Configuration > Object > AAA Server > LDAP > Add/Edit
The following table describes the labels in these screens.
Table 136 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add/Edit
LABEL DESCRIPTION
Name Enter a descriptive name (up to 63 alphanumerical characters) for identification purposes.
Description Enter the description of each server, if any. You can use up to 60 printable ASCII
characters.
Server Address Enter the address of the AD or LDAP server.
Backup Server If the AD or LDAP server has a backup server, enter its address here.
Address
Port Specify the port number on the AD or LDAP server to which the NXC sends authentication
requests. Enter a number between 1 and 65535.
This port number should be the same on all AD or LDAP server(s) in this group.
Base DN Specify the directory (up to 127 alphanumerical characters). For example,
c=US
Use SSL Select Use SSL to establish a secure connection to the AD or LDAP server(s).
Chapter 24 AAA Server
.
NXC Series User's Guide
260
o=ZyXEL,