ZyXEL Communications NXC2500 User Manual page 49

Table 18 Dashboard (continued)
LABEL DESCRIPTION
Boot Status This field displays details about the NXC's startup state.
OK - The NXC started up successfully.
Firmware update OK - A firmware update was successful.
Problematic configuration after firmware update - The application of the
configuration failed after a firmware upgrade.
System default configuration - The NXC successfully applied the system default
configuration. This occurs when the NXC starts for the first time or you intentionally
reset the NXC to the system default settings.
Fallback to lastgood configuration - The NXC was unable to apply the startup-
config.conf configuration file and fell back to the lastgood.conf configuration file.
Fallback to system default configuration - The NXC was unable to apply the
lastgood.conf configuration file and fell back to the system default configuration file
(system-default.conf).
Booting in progress - The NXC is still applying the system configuration.
Licensed Service
Status
# This shows how many licensed services there are.
Status This is the current status of the license.
Name This identifies the licensed service.
Version This is the version number of the service.
Expiration If the service license is valid, this shows when it will expire. n/a displays if the service
license does not have a limited period of validity. 0 displays if the service is not licensed
or has expired.
Count This field displays how many managed APs the NXC can support with your current
license. This field does not apply to the other services.
Extension Slot This section of the screen displays the status of the USB ports.
# This field displays how many USB ports there are.
Extension Slot This field displays the name of each extension slot.
Device This field displays the name of the device connected to the extension slot (or none if no
device is detected).
Status Ready - A USB storage device connected to the NXC is ready for the NXC to use.
none - The NXC is unable to mount a USB storage device connected to the NXC.
Top 5 Station Displays the top 5 Access Points (AP) with the highest number of station (aka wireless
client) connections.
# This field displays the rank of the station.
AP MAC This field displays the MAC address of the AP to which the station belongs.
Max. Station This field displays the maximum number of wireless clients that have connected to this
Count
AP.
AP Description This field displays the AP's description. The default description is "AP-" followed by the
AP's MAC address.
System Resources
CPU Usage This field displays what percentage of the NXC's processing capability is currently being
used. Hover your cursor over this field to display the Show CPU Usage icon that takes
you to a chart of the NXC's recent CPU usage.
Chapter 4 Dashboard
NXC Series User's Guide
49