ZyXEL Communications NXC2500 User Manual page 391

Table 196 Registration Logs (continued)
LOG MESSAGE
Verify server's
certificate has
failed.
Get server response
has failed.
Expiration daily-
check has failed:%s.
Do expiration daily-
check has failed.
Because of lack must
fields.
Server setting error.
Do expiration daily-
check has failed.
Do expiration daily-
check has succeeded.
System bootup. Do
expiration daily-
check.
After register. Do
expiration daily-
check immediately.
Time is up. Do
expiration daily-
check.
Read MyZyXEL.com
storage has failed.
Open /proc/MRD has
failed.
Unknown TLS/SSL
version: %d.
Load trusted root
certificates has
failed.
Certificate has
expired.
Self signed
certificate.
Self signed
certificate in
certificate chain.
Verify peer
certificates has
succeeded.
Appendix A Log Descriptions
DESCRIPTION
The device could not process an HTTPS connection because it could not verify
the server's certificate.
The device sent packets to the server, but did not receive a response. The root
cause may be that the connection is abnormal.
The daily check for service expiration failed, an error message returned by the
MyZyXEL.com server will be appended to this log.
%s: error message returned by myZyXEL.com server
The device received an incomplete response to the daily service expiration
check and the packets caused a parsing error for the device.
The device could not retrieve the server's IP address or FQDN from local.
The daily check for service expiration failed.
The daily check for service expiration was successful.
The device processes a service expiration day check immediately after it starts
up.
The device processes a service expiration day check immediately after device
registration.
The processes a service expiration day check every 24 hrs.
Read data from EEPROM has failed.
This error message is shown when getting MAC address.
The device only supports SSLv3 protocol. %d: SSL version assigned by client.
The device needs to load the trusted root certificate before the device can
verify a server's certificate. This log displays if the device failed to load it.
Verification of a server's certificate failed because it has expired.
Verification of a server's certificate failed because it is self-signed.
Verification of a server's certificate failed because there is a self-signed
certificate in the server's certificate chain.
The device verified a server's certificate while processing an HTTPS
connection.
NXC Series User's Guide
391